XH-RF-CN303 remote controller is full color multifunctional RGB LED controller based on PWM technology and is dedicated to control entire RGB color changes of LED lights with 4 wires(common anode), such as RGB LED strip, LED module, LED spot lights, LED wall-washer, LED under water lamp and other LED lights. It can be controlled both by remote controller and pressing buttons on the body panel .It has the characteristics of a high receiver sensitivity and excellent anti-interference ability. Meanwhile, its slim and delicate shape enables a no sweat installation and a simple operation.

   Working temperature :-20~60℃ 

   Supply voltage: DC 5~24V

   Product size: L210*W40*H30mm

   Package size: L215*W45*H35mm

   Changing mode: 29 modes         

  Remote distance: >=100m

   Color depth: Max.256 level per RGB.      

   Bright adjust:  8 levels

  Speed adjust: 8levels

   Net weigh: 200g                   

  Gross weight:  230g

   Output: Three CMOS drain-open output   

   Max output current: 8A per channel

1) Controlled both by remote controller and pressing buttons on the body panel, reliable control distance can reach as far as 100m without restriction of direction and obstacle.

2) Input Voltage range: DC 5~24V

3) 3-channel RGB full color control, max output current 8A per channel.

4) 29 modes of changing, such as static, gradual, jumpy etc., with color depth max 256 levels per RGB.

5) Speed and brightness of each mode is adjustable separately from 1-8 levels.

6) Can rest at current color and color depth.

7) Can restore to default settings by pressing RESET button.
 

3.Controlled both by remote controller and pressing buttons on the body panel, function of each as below:

Button "ON/OFF": Turn on/off the controller.                         

Button "PAUSE/2": Keep current status, press it again, will continue to change.

Button “MODE+/M+/3”: Enter the next mode.

Button “MODE -/M -/4”: Return to the previous mode.

Button “SPEED/S/5”: Speed up/down color changing. (1~8 levels)

Button “BRIGHT/B/6”: Adjust LED brightness levels. (1~8 levels)

Button “RESET”: Restore to default status if press this button over 3 seconds.

1.Match with the RGB flexible strip,easily control the colors via remote and body panel

2.Wireless touching remote and control distance is more than 100meters

3.Color modes: Multi funciton, 29 kinds of color change mode.

4.When changing color modes such as 3/7color gradual/ jumpy changing, the speed is 1-8 level adjustable, and the brightness is 1-8 step level adjustable,

When single color modes: the brightness is 1-8 steps level adjustable

5.Press the button Pause, you can keep the current color

6.Wide voltage input: DC5V-24V

7. Momery fuction: when you turn off the power supply, the controller can remember the modes, do not need to choose the modes again.

1) Please don't install this controller in lightening, intense magnetic, humid and high-voltage fields.

2) To reduce the risk of component damage and fire caused by short circuit, make sure correct connection and no short circuit before connecting to power .

3) Check if the voltage and power adapter suit the controller and if anode or cathode definition is the same as the controller's.

4) If device has been damaged during transport, don’t take any action without contacting your supplier. If being used properly in accordance with the instruction, and quality problems occur, please contact local supplier too, we provide free repair or

replacement services.